carbide carbon的例句大全

The results showed that methane exhibited rather high decomposition activity and carbide carbon and graphitic carbon were detected.

结果表明，甲烷具有相当高的裂解积炭活性，裂解后生成炭化物（carbide炭）和石墨炭两种不同活性的炭种；

Comparison between calculated and experimental adsorption data showed that the prediction was satisfactory, and the average deviations between the calculated and experimental values for Shanghai made Carbon and Union Carbide Carbon were 1.8% and 3.1% respectively.

吸附量预计值和实验值的比较，表明预计是令人满意的。对于国产活性炭和美国联合炭化合物公司活性炭，其预计值和实验值的平均相对误差分别为1.8%和3.1%。

The technique of centrifugal casting was used. Study on Freeze-Casting of Aqueous Silicon Carbide/ Carbon Black Slurry

采用离心浇注法成型。水基碳化硅/炭黑料浆冷冻浇注成型工艺研究

Coating silicon carbide on carbon fibres by PVD

用物理溅射法在碳纤维表面涂覆SiC

Silicon Carbide-Carbon Composite Material& Siliconized Graphite

碳化硅-碳复合材料&硅化石墨

Functional Silicon Carbide-Carbon Fiber

碳化硅-碳功能纤维

Activated sintering and sintering kinetics of boron carbide with carbon as activator

掺碳碳化硼活化烧结及其动力学

On the basis porous carbon , the reactive sintering silicon carbide ceramics were prepared by ihrigizing reaction.

以此为基础, 进一步通过渗硅反应,制成反应烧结碳化硅陶瓷.

The system pressure changed the adsorption abilities and pore size distributions of carbide and activated carbon.

反应压力能够改变炭化产物和活化产物的吸附性能和孔径分布.

An introduction on Union Carbide Corporation Different spheroidizing technologies were applied to the hot-rolling ultra-high carbon steel by DET ( divorced eutectoid transformation).

联合碳化物公司利用离异共析原理，采用不同的热处理工艺球化热轧超高碳钢。

There is no direct relation between the grade of carbide network and individual carbon content, neither is individual chrome content, because the conditions for strictly controlling contrast processing parameter is imperfect.

碳化物网状级别单独与碳含量或铬含量没有很直接的关系，原因是本试验不具备严格控制工艺参数的条件。

While forging the high-carbon chromium bearing steel by the finish forge press, there still remains the issues that the carbide network can not be crushed with the low qualification rate.

精锻机锻造高碳铬轴承钢时存在网状碳化物不易破碎、锻件合格率低的问题。

A solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite.

含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。

Effect of carbon activity in matrix on dynamics of carbide diffusion coating

钢中碳活度对碳化物覆层扩散处理动力学的影响

Effect of carbon content on microstructure and properties of cemented carbide with iron and nickel-based bonders

碳含量对铁镍代钴硬质合金组织和性能的影响

Study on Chemical Reactions Between Metal and Carbon in Carbon/ Carbon Composites Containing Refractory Metal Distribution in Statistics of Wear Rate Data of Refractory Metal Carbide Coatings

混杂难熔金属C/C复合材料中金属与碳反应初步研究难熔金属碳化物覆层磨损率的统计分布

A nonmagnetic solid solution of ferric carbide or carbon in iron, used in making corrosion-resistant steel.

奥氏体一种 非磁性 的固状可溶性含铁碳化物或含碳铁, 用于制作不锈钢.

Careful carbon control during degumming is the key to the production of large non-magnetic carbide dies.

生产大型无磁合金模具的关键工艺因素是脱胶过程中的控碳.

A carbide former if there is sufficient Carbon in the steel also.

如果钢中有足够的碳则碳化物就形成了.

Gas chromatographic determination for the gas content of hydrogenium, carbon monoxide, carbon dioxide, methane, and ethyne in the gas from the calcium carbide furnace

气相色谱法测定电石炉气中氢气、一氧化碳、二氧化碳、甲烷、乙炔气体含量